• 振动摩擦焊接机
  • 超音波焊接
  • 振动摩擦焊接机

Contact us

上海金沙国际平台登录_js9905com金沙网站

电话:021-64683698

传真:021-64683698

邮箱:shang--rong@163.com

网址:www.shang-rong.com

公司地址:上海市徐汇区中山南二路158号

工厂地址:上海市奉贤区青村镇品星路278号


Your current position: Home>>ABOUT US>>Bearing industry

Cleaning products: all kinds of bearing components


Cleaning materials:

Dust particles, grease, etc.


Cleaning requirements:

Without the use of CFCs, remove grease and oils from the stainless steel bearings, cleanliness can achieve the same cleaning solution used in the past have.


Previous cleaning method:

Trichloroethane solvent or steam cleaning


Recommended approach:

- The level of immersion in the bearing 40KHz ultrasonic tank cleaning heating for 5 minutes, the tank temperature 52 ° C for half an aqueous solution, using high-concentration solution.

- Within the 66 ° C hot water, ultrasonic overflow rinsed for 90 seconds at a flow rate 0.3GPM, dirt or water into the make hydrocarbon separated and water separation tank.

- At 71 ° C hot water, through three cascade rinsing tank 3 minutes, flow rate 1.5GPM.

- Using an air knife hair, followed by blowing a hot air drier, the drying temperature is 116 ° C


Process advantages:

- Enhanced ability to clean the ion and organic dirt

- No change in the manufacturing process currently applied grease or lubricant

- Better process control - simple processing techniques, does not require complicated monitoring

- Environmentally friendly - the dirt and hydrocarbons separated organics from wastewater, effective maintenance of equipment


  • Service
  • Service
  • Service
  • Service
二维码

Scanning

Share
Welcome to our message
Please enter the message, we will contact you soon.
Name
Contact
Phone
Mobile number
XML 地图 | Sitemap 地图