Quick die change welding hot plate welding machine中心

The main features

快速换模热板机在传统的热板机的基础上，增设一套热模储存架。从而使一套热模在工作的同时，另一套热模可预热准备中。如此精心的设计使2套热模可以快速换模，并且节约了大量的预热时间，尤其适合焊多部件及对称结构的产品。列如汽车的左右大灯就能用到。

Quick die change hot plate in thermal machine based on the traditional, a set of hot mold storage racks. Thus a set of hot die work at the same time, another set of hot die preheating preparation. So carefully designed so that 2 sets of hot die can quick die change, and saves a lot of preheating time, especially for welding parts and symmetrical structure products. The column such as the car left and right headlight can be used.

快速换模热板机采用PLC 和彩色的工业触摸屏，增强人机交换性，方便客户操作。同时，本机采用电子尺做位移传感器，可在人机界面上精确设定各个动作点位置， 可储存100套模具的数据。改变了传统热板机的换模调试的不便。

Quick die change hot plate using PLC and color touch panel, enhanced human exchange, user-friendly. At the same time, the machine adopts electronic ruler displacement sensor can precisely set action point position of each in the man-machine interface, can store 100 sets of mould data. Change the mode debugging inconvenience of traditional hot plate exchanger.

其它特性

Other characteristics

1、可熔接除铁氟龙以外的热可塑性塑胶；

1, can be fused in addition to Teflon outside of the thermo plastic;

2、熔接时间极为短暂，通常范围（0.05-1秒）；

2, welding time is very short, usually in the range (0.05-1 seconds);

3、超声波熔接不会产生如化学药剂之毒性，是安全的熔接加工；

3, ultrasonic welding does not produce such as toxic chemicals, is safe welding processing;

4、无须添加任何粘剂，操作简更快捷。

4, do not need to add any agent, simple operation more convenient.

5、可经由介质如水，油等熔接于接合面。

5, through a medium such as water, oil and other welding to joint surface.

6、熔接效果，可达气密、液密等密封效果；

6, welding effect can reach airtight liquid tight sealing effect, etc.;

7、可作直接与传导熔接；

7, can be direct and conduction welding;

8、熔接能量因塑胶材质而异，而且并非超声波振动全部材质，只选择适合发生的振动面生熟，所以产品表面无伤痕之顾虑，此为传道熔接之特色。在较硬的塑胶质熔接时，更能发挥其熔接效果

8, welding energy due to plastic materials vary, and not all the material ultrasonic vibration, vibration occurred only to choose noodles cooked, so the product surface without scar concerns, the Ministry of weld characteristics. In hard plastic welding, welding effect can play its