• 振动摩擦焊接机
  • 超音波焊接
  • 振动摩擦焊接机

Products

Contact us

上海金沙国际平台登录_js9905com金沙网站

电话:021-64683698

传真:021-64683698

邮箱:shang--rong@163.com

网址:www.shang-rong.com

公司地址:上海市徐汇区中山南二路158号

工厂地址:上海市奉贤区青村镇品星路278号


Your current position: Home?>>?PRODUCT >> Turbine blade welding machines

Automatic welding machine through flow fan blade

  • Category:Turbine blade welding machines

  • Clicks:
  • Release date:2014/12/19
  • More
  • Online Inquiry
  • Product Features
  • Device Description
  • Technical Parameters
  • Download

The traditional manual welding products big bounce, high reject rate, efficiency and low defects of various specifications of the cross flow fan, fan blade ultrasonic welding machine is designed to solve such defects and the design of the semi automatic welding machine.

The characteristics of:

1 NC improvement products, with a large screen liquid crystal display as the man-machine interface of welding parameter setting, the stepper motor (servo motor) long control welding fixed numerical control positioning system composed of ball screw

2 the equipment performance comparable to imported machine is reliable and durable, cost-effective, easy maintenance, welding products widely applied etc.

The main purposes:

The main products are plastic axial flow fan blade, cross flow / cross flow fan blade, a centrifugal fan, automobile fan blade, fan of computer / frame leaves impeller products, welding machine for household electrical appliance, auto parts, electrical, medical and health, aerospace and other industries are widely applied through a through flow wind blade production equipment pan flow fan.


1, the total control cabinet: machine electrical control equipment, the total switch, ultrasonic time and the man-machine interface and the alarm device are installed in the control cabinet. Equipment working speed, and the working procedure of the change is to be operated in the control cabinet human-machine interface.

2, the host: main table (automatic clamping device) and ultrasonic welding machine is composed of two parts.

3, welding die: cross flow wind blade equipped with mould.

4, the base adopts servo motor + screw driven working platform of single section products rising height, four axis positioning, ultrasonic welding. The control system adopts PLC control + touch screen operating system, can store more than 300 groups of data.

5, pneumatic cross flow wind blade production equipment components are the use of AIRTAC products.

6, electrical components using OMRON or similar imported components.

7, the base welding range: 60---127mm, welding length 0----1200mm

8, the four clamp cross flow wind blade production equipment in parallel and vertical penetration welding machine and the chassis flow fan (intermediate tray), verticality < 0.02mm. The clamp shaft with diameter of 40 round shaft, a circular shaft to quenching and tempering, surface hardening, hard chromium plating.

9, welding machine with a base tray of the set.

Table 10, smooth operation, operation of cross flow fan welding machine speed greater than 5 m / min..

11, the ultrasonic frequency of 15KHZ


Technical parameters

The 1 blade diameter (mm) 60 < 127

The total length of 2 blades (mm) less than or equal to 1200

The 3 section number and set according to the height of the product

The 4 air pressure (Mpa) greater than 0.4MPa

The 5 power supply voltage AC380V

6 power consumption (W) 2500 (not including the electronic box power)

The 7 dimension (length * width * height) 800*900*2500





Related Tags:

Pre:没有了
Next:没有了

Related Products:

Related News:

  • Service
  • Service
  • Service
  • Service
二维码

Scanning

Share
Welcome to our message
Please enter the message, we will contact you soon.
Name
Contact
Phone
Mobile number
XML 地图 | Sitemap 地图